Connect iPhone/iPad to MWSU-Admin

1. Settings > Wi-Fi > Click MWSU-Admin

2. Type in SSO credentials

3. Click Trust

4.Check to make sure you are still on the correct SSID

5. Go to Safari and enter in the following exact URL: http://1.2.3.4

6. This will auto re-direct to the following web page. Click Start

7. Type in a device name. The Device ID will auto populate

8. Click Launch Apple Profile and Certificate Install
     a. You will do this process twice as 2 certificates will be installed

9. Click Allow.

10. STOP and do not press anything on the screen. Proceed to the next step

11. Go to Settings > Profile Downloaded

12. Click Install

13. Enter the iPhone passcode

14. Click Install

15. You will get a screen showing that the profile install is complete. Click Done

16. Go to Settings > General > About > (at bottom) Certificate Trust Settings.

17. Click the toggle to enable the DigiCert Global Root CA (the toggle will turn green)

18. Go to Safari and the tab you were working on. (The same screen should still be there)

a. Now the installation of the second certificate begins

19. Click Launch Apple Profile and Certificate Install

a. You will do this process twice as 2 certificates will be installed

20. Click Allow.

21. STOP and do not press anything on the screen. Proceed to the next step

22. Go to Settings > Profile Downloaded

23. Click Install

24. Enter the iPhone passcode

25. Click Install

26. Go to Settings > Wi-Fi and verify that you are connected to MWSU-Admin

27. Go to a browser and go to a new website to confirm the connection is online